ArticleOpen Access http://dx.doi.org/10.26855/aae.2025.07.001
Research and Analysis of Distributed Machine for Aviation Cable Testing System Based on CAN Bus
Tong An
AVIC Xi'an Aircraft
Industrial Corporation Co., Ltd., Xi'an 710000, Shaanxi, China.
*Corresponding author: Tong An
Published: July 24,2025
Abstract
The distributed machine based on CAN bus for aviation cable testing system is an emerging technology widely used in fields such as aviation cable testing. Efficient communication between multiple test nodes can be achieved through CAN bus, which can achieve full testing of cables and improve the quality of cables. This technology has advantages such as strong reliability, scalability, and efficiency. Therefore, there is an urgent need to study and analyze the distributed machine of aviation cable testing system based on CAN bus. In this constantly developing and advancing technological era, the distributed machine of aviation cable testing system based on CAN bus, as a highly practical technology development field with increasing demand, needs to strengthen research and analysis to promote its rapid development and application.
Keywords
CAN bus; Aviation cables; System distribution machine
References
[1] Zhang XQ, Chen ZS. Research on the design of the distribution machine of the aviation cable test system based on CAN bus. 2020.
[2] Chen Y, Zhao ZP. Research on the distribution machine of the aviation cable test system based on CAN bus. Modern Electronic Technology. 2011;34(6):3.
[3] Zhang ZT, Guo X, Li H, et al. Research on the automatic test system of a new type of aviation engine cable. China New Technol-ogies and New Products. 2012(14):1.
[4] Miao XW, Hu WF, Zhang W, et al. Automatic test system of the speed channel of a certain type of aviation engine electronic con-troller. Gas Turbine Test and Research. 2003;16(3):3.
[5] Xiong YJ. Research on the automatic test system of aviation engine electronic controller. In: 2014 Aviation Test and Testing Technology Summit and Academic Exchange Conference; 2014.
Copyright
© 2025 by the author(s).
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives (CC BY-NC-ND) license, which permits non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited and is not modified or adapted.
https://creativecommons.org/licenses/by-nc-nd/4.0/
How to cite this paper
Research and Analysis of Distributed Machine for
Aviation Cable Testing System Based on CAN Bus
How to cite this paper: Tong
An. (2025) Research
and Analysis of Distributed Machine for Aviation Cable Testing System Based on
CAN Bus, Aerospace
and Aeronautical Engineering, 1(1), 1-4.
DOI: http://dx.doi.org/10.26855/aae.2025.07.001