References
[1] Ahmed M. Ahmed, Mohamed S. Elksasy, Amr Ali-Eldin, & Faiz F. Areed. Brushless DC Motor Speed Control Using Both PI Controller and Fuzzy PI Controller. International Journal of Computer Applications, Volume 109, No. 10, January 2015, 29-35.
[2] Ping Zheng, Yong Liu, Yan Wang, & Shukang Cheng. Magnetization Analysis of the Brushless DC Motor Used for Hybrid Electric Vehicle. IEEE Transactions on Magnetics, Vol. 41, No. 1, January 2005, 522-524.
[3] S.S. Bharatkar, R. Yanamshetti, D. Chatterjee, & A.K. Ganguli. Dual-Mode Switching Technique for Reduction of Commutation Torque Ripple of Brushless DC Motor, IET Electr. Power Appl., 2011, Vol. 5, 193-202.
[4] Yong Liu, Z. Q. Zhu, & David Howe. Direct Torque Control of Brushless DC Drives with Reduced Torque Ripple. IEEE Transactions on Industry Applications, Vol. 41, No. 2, March/April 2005, 599-608.
[5] I. Janpan, R. Chaisricharoen, & P. Boonyanant. Control of the Brushless DC Motor in Combine Mode. Procedia Engineering, 2012, Vol. 32, 279-285.
[6] D. M. Ionel, J. F. Eastham, T. J. E. Miller, & E. Demeter. Design Considerations for Permanent Magnet Synchronous Motors for Flux Weakening Applications. IEE Proc-Electr. Power Appl., Vol.145, No.5, September 1998, 435-440.
[7] Parag R. Upadhyay, K. R. Rajagopal, & B. P. Singh. Effect of Armature Reaction on the Performance of an Axial-Field Permanent-Magnet Brushless DC Motor Using FE Method. IEEE Transactions on Magnetics, Vol. 40, No. 4, July 2004, 2023-2025.
[8] Bhim Singh & Vashist Bist. A BL-CSC Converter-Fed BLDC Motor Drive with Power Factor Correction. IEEE Transactions on Industrial Electronics, Vol. 62, No. 1, January 2015, 172-183.
[9] Fabio Giulii Capponi, Roberto Terrigi, Federico Caricchi, & Luca Del Ferraro. Active Output Voltage Regulation for an Ironless Axial-Flux PM Automotive Alternator with Electromechanical Flux Weakening. IEEE Transactions on Industry Applications, Vol. 45, No. 5, September/October 2009, 1785-1793.
[10] Emine Bostanci, Zdeno Neuschl, & Robert Plikat. No-Load Performance Analysis of Brushless DC Machines with Axially Displaceable Rotor. IEEE Transactions on Industrial Electronics, Vol. 61, No. 4, April 2014.
[11] Keitaro Ueda, Shigeo Morimoto, Yukinori Inoue, & Masayuki Sanada. A Novel Control Method in Flux-weakening Region for Efficient Operation of Interior Permanent Magnet Synchronous Motor. IEEJ Journal of Industry Applications, Vol.4, No.5, 2015, 619-625.
[12] Gianmario Pellegrino, Eric Armando, & Paolo Guglielmi. Direct Flux Field-Oriented Control of IPM Drives with Variable DC Link in the Field-Weakening Region. IEEE Transactions on Industry Applications, Vol. 45, No. 5, September/October 2009, 1619-1627.
[13] Hong-xing Wu, Shu-kang Cheng, & Shu-mei Cui. A Controller of Brushless DC Motor for Electric Vehicle. IEEE Transactions on Magnetics, Vol. 41, No. 1, January 2005, 509-513.
[14] Yoshihiro Okuyama, Tomohiro Tanaka, Tsuyoshi Hanamoto, & Hiroaki Yamaga. A New Current Vector Control Method of IPMSM in Flux Weakening Region to Prevent Inverter Voltage Saturation. IEEJ Journal of Industry Applications, Vol.2, No.6, 2013, 315-322.
[15] Jiunn-Jiang Chen & Kan-Ping Chin. Automatic Flux-Weakening Control of Permanent Magnet Synchronous Motors Using a Reduced-Order Controller. IEEE Transactions on Power Electronics, Vol. 15, No. 5, September 2000, 881-890.
[16] Ayman M. EL-Refaie, Thomas M. Jahns, Patrick J. McCleer, & John W. McKeever. Experimental Verification of Optimal Flux Weakening in Surface PM Machines Using Concentrated Windings. IEEE Transactions on Industry Applications, Vol. 42, No. 2, March/April 2006, 443-453.
[17] Jiunn-Jiang Chen & Kan-Ping Chin. Minimum Copper Loss Flux-Weakening Control of Surface Mounted Permanent Magnet Synchronous Motors. IEEE Transactions on Power Electronics, Vol. 18, No. 4, July 2003, 929-936.
[18] M. Nasir Uddin & Md. Muminul Islam Chy. Online Parameter-Estimation-Based Speed Control of PM AC Motor Drive in Flux-Weakening Region. IEEE Transactions on Industry Applications, Vol. 44, No. 5, September/October 2008, 1486-1494.
[19] Ayman M. EL-Refaie, & Thomas M. Jahns. Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated Windings. IEEE Transactions on Industry Applications, Vol. 41, No. 3, May/June 2005, 790-800.
[20] Keiichiro Kondo & Satoshi Kitamura. Torque Control Method for Permanent Magnet Synchronous Motor Operating in Field Weakening Region at Middle Speed Range. IEEJ Journal of Industry Applications, Vol.2, No.2, 2013, 106-112.
[21] Z. Q. Zhu, J. X. Shen, & D. Howe. Flux-weakening Characteristics of Non-sinusoidal Back-EMF PM Machines in Brushless DC and AC Modes. Journal of Asian Electric Vehicles, volume 4, number 2, December 2006, 919-925.
[22] Masataka Miyamasu & Kan Akatsu. Efficiency Comparison between Brushless DC Motor and Brushless AC Motor Considering Driving Method and Machine Design. IEEJ Journal of Industry Applications, Vol.2, No.1, 2013, 79-86.
[23] Tingna Shi, Yuntao Guo, Peng Song, & Changliang Xia. A New Approach of Minimizing Commutation Torque Ripple for Brushless DC Motor Based on DC–DC Converter. IEEE Transactions on Industrial Electronics, Vol. 57, No. 10, October 2010, 3483-3490.